SHORT TERM TRAINING PROGRAMME ON ROBOTICS AND INDUSTRIAL AUTOMATION @ TRIVANDRUM ENGINEERING COLLEGE
Contents:-
Drives: Cylinders for different drive purposes
Valves: Various valve types (pneumatic/hydraulic/electric controlled)
Controls: Pneumatic, hydraulic, and electric controls of valves
Position control: Limit switches and sensors
Speed control: Uses of throttle valves
Logic control: AND/OR valves
Pressure control: Uses of adjustable pressure sensors
Time-dependent control, Symbolic representation of devices, standards
Relay Logics, Electro-Pneumatics, Programmable Logic Controllers, Interfacing
hydraulic and pneumatic system with PLC, Study of different types of sensors and their application.
Hands on Training on Pneumatic, Hydraulic, Electro-Pneumatic circuits, electro hydraulic and Interfacing hydraulic and pneumatic system with PLC.
Basics Of CNC programming: G codes and M codes.
Advanced programming techniques using
Basic machining cycles
Advanced machining cycles
Canned cycles
Mirroring commands
Subroutines (Subprogram)
Hands on training sessions using Vertical Machining Centre
Robotics: Introduction - Definitions, Robot Elements - links, joints, end effector, actuators. Robot specifications, Work envelope of different robots, Classification of Robots, Sensors in Robotics- status sensors, environment sensors,quality control sensors, safety sensors, ROS, Lego Programming, Introduction to RobotStudio Software.
Mobile robots: steered and differentially driven robots. Hands on training on differentially driven robots, quadcopter, manipulator.
Outcomes:-
The participant:
can design, assemble and test basic pneumatic/hydraulic/electro-pneumatic circuits
can maintain and troubleshoot pneumatic/hydraulic/electropneumatic/electro- hydraulic components and basic control systems.
can design, assemble, program and test robotic systems.
Facilities of centre:
Hydraulic kit- 6 nos.
Pneumatic kit- 6 nos.
PLC kit- 6 nos.
Sensoric kit- 4 nos.
Differentially driven mobile robot – 1 nos.
Quadcopter – 1 nos.
ABB manipulator – 1 nos.
Lego Mindstorms EV3 Kit- 6No.
RobotStudio Software
Duration: 120 hours
Timing: Batch I- Monday, Wednesday& Friday 12.30PM-6.30PM, Saturday-9.00AM-4.00PM Batch II- Monday- Friday: 4.30PM-7.30PM, Saturday: 9AM-4PM
Eligibility: Degree/Diploma in Mechanical/Electrical/Instrumentation/Electronics Engineering or Allied branches.
Course Fee: Rs.7500/-( Direct Payment Through Centre for Continuing Education, CET or DD drawn in favour of BOSCH-CET CENTRE FOR CONTG EDN Payable at Trivandrum DD and duly filled application form should reach by registered post to The Centre for Continuing Education, College of Engineering Trivandrum pin: 695016 on or before 05/02/2020)
Last Date for Apply: 05.02.2020
Date of Commencement: 12.02.2020
No. Of Seats per Batch: 25
Contact: Dr. Vinod B. R, Co-ordinator, Bosch Rexroth CET Centre of Excellence in Automation Technologies, Assistant Professor, Department of Electronics and Communication Engineering CET, TVM-695016. vinodbrcet@gmail.com, mob: 9447344250 Prof. Shafeek M, Course Co-ordinator, Assistant Professor, Department of Mechanical Engineering, CET, TVM-695016.e-mail: shafeek@cet.ac.in, mob: 9495828145
ഈ അവസരം പരമാവധി ഉപയോഗപ്പെടുത്തുക.
അറിഞ്ഞില്ല എന്ന കാരണത്താൽ ആർക്കും അവസരം നഷ്ടപ്പെടരുത്.
നിങ്ങളുടെ എല്ലാ കൂട്ടുകാർക്കും ഗ്രൂപ്പുകളിലും ഷെയർ ചെയ്താൽ ആർക്കെങ്കിക്കും ഉപകാരപ്പെട്ടേക്കാം...
●▬▬▬▬▬▬▬▬▬▬▬▬▬●
കൂടുതൽ വിവരങ്ങൾക്കും, ഓൺലൈൻ ആയി അപേക്ഷ സമർപ്പിക്കുന്നതിനും സമീപിക്കുക
●▬▬▬▬▬▬▬▬▬▬▬▬▬●
E-Zone Digital Seva CSC
(Under The Ministry of Electronics & Information Technology, Govt. of India)
Near Pulpatta Grama Panchayath
Pookolathur, Malappuram
📱 09747 822 444
📱 09747 822 444
📱 07025 822 444
☎️ 04832 822 444
📧 ezonecsc@gmail.com
●▬▬▬▬▬▬▬▬▬▬▬▬▬●
തൊഴിൽ, വിദ്യാഭ്യാസം, അറിയിപ്പുകൾ, സർക്കാർ, സർക്കാരിതര സേവങ്ങളും നിങ്ങളുടെ വിരൽത്തുമ്പിൽ ലഭിക്കാനായി E-Zone Follow ചെയ്യൂ...
●▬▬▬▬▬▬▬▬▬▬▬▬▬●
Facebook:👉 https://facebook.com/ezonepkr/
Instagram:👉 https://www.instagram.com/ezonepkr/
Twitter:👉 https://twitter.com/ezonepkr/
●▬▬▬▬▬▬▬▬▬▬▬▬▬●
Comments
Post a Comment